Dual Channel Bluetooth Amplifier Board,Quimat TDA7492 2 x 50 Watt 2 Channel Wireless Audio Receiver Digital Hifi Module with Protective Case and Heat sinks
Dual Channel Bluetooth Amplifier Board,Quimat TDA7492 2 x 50 Watt 2 Channel Wireless Audio Receiver Digital Hifi Module with Protective Case and Heat sinks by Quimat at The Met Theatre. MPN: QY03. Hurry! Limited time offer. Offer valid only while supplies last. Quimat have modified the TDA7492P audio receiver digital amplifier board that will be more convenient for users to operate the board.The key of the operation stability of the board are the input voltage and heating problems,so Quimat added the heat sinks to enhance heat dissipation which help the users to avoid the board burned by the high temperature. Specification: Power:2.1 interface 8-25V DC power supply Audio input: stereo input various versions of the Bluetooth connection, using
Product Description & Reviews
Quimat have modified the TDA7492P audio receiver digital amplifier board that will be more convenient for users to operate the board.The key of the operation stability of the board are the input voltage and heating problems,so Quimat added the heat sinks to enhance heat dissipation which help the users to avoid the board burned by the high temperature. Specification: Power:2.1 interface 8-25V DC power supply Audio input: stereo input various versions of the Bluetooth connection, using high-quality Bluetooth chip,Bluetooth V4.0,high software compatibility Output Impedance:8 ohms Best(4,6,8,16 ohm impedance can drive speakers) Output Power:powered 25V,6-ohm impedance output 2 X 50W,8 ohm impedance output 2 X 40W dual-channel If you directly use Bluetooth,when power,wait 3s-10s,until LED Blue and Red light flashing alternately,then you can use your device to find my Bluetooth module,then connect it,can directly use it. Parameter Material:PCB Digital Amplifier Board:3.2*2.0*0.7 inches(L*W*H) Protective Case:4.0*2.7*1.0 inches(L*W*H) Net Weight:0.2 pounds Package Includes: 1 x Quimat Hifi Mini Bluetooth Digital Amplifier Board with 3 bit 0.36 "heat sink 1 x Protective Case with A full set of screws, studs and magnetic pads 1 x 2.1mm x 5.5mm Male Connector
Features & Highlights
- Upgrated version,added the Heat Sinks,which enhanced operation stability greatly of the audio receiver board.
- TDA 7492P digital amplifier chip,designed to optimize the circuit layout.Voice pure dynamic feels dye-in-the-wood.
- Bluetooth connection,remember your device,ready to open the door to the music world anytime.
- Thermal overload protection and short-circuit protection,fully protected against overvoltage,undervoltage,overcurrent and thermal overloads,etc.
- 100% Brand New and High Quality.High cost-performance.
|Color:||With Protective Case + Heat sinks|
|Item Weight:||0.44 pounds|
|Package Weight:||0.44 pounds|
|Package Size:||4.17 x 1.5 x 1.5 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Quimat, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: FMGF005, ean: 0602430109119,
FisherMo Mini Bluetooth Power Amplifier Audio / Video / MP3 / Smartphone / PC / FM Radio for Auto Motorrad Home With power supply and RCA Specifications: Input voltage: 12 ~ 13.5V / 3A ~ 7 A Input current: 5A Output power: 45W * 2 Load impedance: 4-8 Ohm Frequency response: 20Hz-20KHz Total Harmonic Distortion: 70db Input sensitivity: 470mV Input Impedance: 47K Meterial: Aluminum alloy Dimensions: 165 * 128 * 41 (mm) Features: STMicroelectronics brand new amplifier IC Built-in USB / MMC and
By Douk Audio
mpn: 4330353692, ean: 6245435006577,
Parameters : Work modle: class D Quiescent current: 60mA Work efficiency: 90% Rated output power: 100W+2*50W Frequency response: 20Hz to 20KHz Working voltage: DC18V to DC24V Maximum output current: 3A PCB SIZE：(L*W)10.4*10.3cm/4.09''*4.06'' Input mode: only bluetooth input function. Potentiometer distance : 22MM 22MM 30MM Quantity:1Pc Note: Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon. And due to the difference between different monitors, the
5W*5W Class D Digital Audio Amplifier Board Parameters: Working voltage: DC 5V (please don't use more than 5V, or the IC will be burnt) Output power: 5W 2Ω 5V 3W 4Ω 5V 1.8W 8Ω 5V Input method: single-ended Dimension: 55.12*32.26mm Performance: Efficiency: >90% General harmonic distortion & Noise:Parameters: DROK audio amplifier board working voltage is DC 5V, output power is 5W (2Ω 5V)/3W (4Ω 5V) / 1.8W (8Ω 5V).. Artificial Material: this New-designed power amplifier is made of
mpn: GFJ445_Black, ean: 7717842112558,
Parameters: Audio input: 3.5mm Audio output: RCA Power supply: DC 8-25V; at least 3A Maximum power: 100W Chip: TPA3116D2 + NE5532 Weight: 0.35Kg; 0.2Kg (without package) Dimensions: 68.5 * 33 * 90 mm (not including terminals) Packing List: 1 * amplifierThis subwoofer amplifier adopts brand-new TI TPA3116D2 amplifer chip, which can offer 100W powerful output and 90% efficiency.. Compared with other similar products on the market, it also uses a NE5532 buffer op-amp to achieve more powerful
By Douk Audio
mpn: DZ027, ean: 7413052974794,
Notice: We highly recommend our lastest tube preamp B07719G56B. It will greatly enhance the sound performance of your amp. Specifications: Bluetooth distance: 10 meters Bluetooth standard protocol: Bluetooth 4.0 + EDR Rated power: 50W × 2 Input Interface: Bluetooth, USB sound card, AUX Voice prompts: English Girl Operating mode: button Amplifier chip: American TI Texas Instruments TPA3116 ×2 Power input: DC9V-24V / 3A or above Dimensions (Excluding protrusions): (W)80 × (D)53 × (H)22mm
mpn: CANDY-MICRO2, ean: 0663593058317,
The DS18 CANDY MICRO series offers mini, compact amps that not only have the juice to power your system but will also save you a ton of space in your car or bike to transport whatever you need. Don't sacrifice comfort for better sound when you can simultaneously have both. The Candy Micro series comes in Monoblock and Stereo configurations.Two Channel Micro Amplifier meant to be the smallest and lightest amp you can find. AMAZING FULL RANGE POWER HANDLING- Max Power: 320W. RMS at 4-Ohms: 2 x
DROK Digital Amplifier Board 100W Parameters: Voltage range: DC 10-25V Output power: 100W (Max) Output load: 4-8 Ohm (Recommend) Frequency response range: 14-100KHz Signal-to-noise ratio (SNR): not less than 100DB Switching frequency: 1.2MHz Chip: TPA3116x2 Reverse connection protection: Yes (Positive and negative reversal is not energized.) The number of channels: one left channel and one right channel (PBTL) Special Notes: 1. The speaker of each channel must be connected in strict
By Douk Audio
mpn: DZ030, ean: 7717842118031,
What's more: For the matching 3.5mm audio cables, please search them on Amazon with ASIN: B073RF3R2D or B073RF4NYS. Please note this is a preamplifier (not like NS-08E), which needs to be connected with amplifiers or active speakers. It is not a phono preamp and can't be used for turntables. It suits for almost all amplifiers in the market especially for tube headphone amps like our NS-08E (B014FASL1A), NS-01E (B01I19SBAW) and NS-02E (B01M7101CY), and will greatly enhance the sound performance
mpn: A250, ean: 0741360331846,
Micca OriGain Compact Stereo Integrated Amplifier 50W x 2 (Black)Compact stereo amplifiers are the best choice for powering speakers in the home or office.. Use the OriGain with speakers of any size, from small cubes to full size floor standing speakers.. 50W x 2 power output into 4 Ohm, 30W x 2 into 8 Ohm, less than 0.5% total harmonic distortion. Includes UL-Certified 24V/4.75A power adapter with Level VI Energy Efficiency rating.
mpn: GFJ527_B, ean: 7717842116198,
Replaceable Tube and OP AMP: Tube module: 6C11 (in default); EC81; 6R4 OP AMP: TI NE5532 (in default); OPA2111; OPA2604; OPA2132; OP275; OPA2107; JRC4558; MUSES02; LM4562 Spectrum Operation: Normal mode: 1. Press the button for 1 second - Mode switch (there will be a corresponding preview ). 2. Press the button for 3 seconds - Switch between real mode and AGC mode (there will be a corresponding preview ). 3. Press the button for 5 seconds - Enter the speed setting mode 4. Press the button for